KLING & FREITAG VIDA M, User Manual

Page: 13 / 30

© KLING & FREITAG GMBH Version 1.3 Page 13 of
30
User's Manual K&F VIDA M Accessories for Mobile Use
4 Installing the VIDA M Mounting Adapter
Required Tools Required mounting material
IH4 torque wrench with hexagon-socket drive
and 3 Nm torque Loctite 2400 (supplied with the speaker)
1. Apply Loctite 2400 to the
threads of screws [A] .
2. Slide the tabs of mounting
adapter [B] into the correspond-
ing inlets of speaker [C] .
3. Screw in all M6x10 screws [A]
using an IH4 hexagon socket
wrench. Do not tighten yet!
4. Once all screws are loosely
screwed in, tighten them to a
torque of 3 Nm .
5. For installation on both sides, in-
stall the second mounting
adapter
[D] accordingly.