KLING & FREITAG Self powered, User Manual

Page: 21 / 49

User's Manual K&F Self Powered Subwoofer Systems 'SP'
KLING & FREITAG GMBH ©2003 - 2005 Page 21 of 49
7.2 Connecting the Power Connectors to the Connecting Terminal
2.
1.
3.
1.
2.
Only use the supplied power cable and connect it to a mains outlet with a 16 A fuse.
See instructions in chapter 4 ‘Power Cord’ on page 13.
8. Configurations and Connecting Diagrams
8.1 Operating the Systems without C2 Controller
The subwoofer has an integrated filter for use in this mode, which limits the bandwidth.
The full-range system is protected against low frequency (subsonic) signals by a high
pass filter and when used with bass speakers it is phase aligned with the subwoofers by
means of alignment filters.
8.1.1 Subwoofer with Top Speakers in Full-Range Mode
You can link the input signal (for example from the mixer) from one loudspeaker to
another. It makes no difference whether the input signal reaches the bass speaker first
and is then transmitted to the mid-high speaker or the other way around.
The switch 'FILTERS' on
the SP speaker must be at
'ON' in this mode.
Warning
INPUT
Channel 2
Channel 1
LINE
AC-MAINS
LINE
AC-MAINS
AC ~ 16 A max.
To next
'SP'-Top
or Bass
LINE
AC-MAINS
LINE
AC-MAINS
AC ~ 16 A max.
To next
'SP'-Top
or Bass