background image

User’s Manual 

LINE 212-6 - SP / LINE 212-9 - SP 

KLING & FREITAG GMBH ©2003 - 2006   

Version 4.1, 19.06.2006 

Page 40 of 45 

 

19.

 

Regulations for Disposal 

 

19.1 

 

Germany: 

It is not allowed to dispose of used electrical equipment as domestic waste.   

But please do not dispose of them at official collecting points for recycling either! 
All Kling & Freitag products are plain business-to-business (B2B) products. Disposal of  
Kling & Freitag products labelled with a waste bin sign have thus to be disposed of by  
Kling & Freitag alone. Please call Kling & Freitag at the number stated below if you have 
a Kling & Freitag product to be disposed. We will offer you a straightforward and pro-
fessional disposal not affecting costs.  
If there is no dustbin sign on one of your Kling & Freitag products, because they have 
been sold before March 2006 then by law the owner is in charge of the disposal. For 
these we will be happy to assist and offer you proper ways of disposal. 

Telephone number to call about the disposal of used Kling & Freitag products:  
+49 (511)-96 99 7-0 

Explanation: 
With the ElektroG (law relating to electrical and electronic equipment and appliances) 
we have complied with the EU-directive on waste electrical and electronic equipment 
(WEEE, 2002/96/EC) 
The Kling & Freitag AG has thus labelled all products mentioned in the WEEE from 
03/24/2006 onwards with a sign with a crossed out waste bin and a white bar below. 
This sign indicates that the disposal into the domestic waste is prohibited and that the 
product has been put into circulation at the 03/24/2006 earliest.   
The Kling & Freitag GmbH has been legally registered as a manufacturer with the regis-
tration office EAR. Our WEEE Registration-Nr. is: DE64110372 
For the German Registration office EAR we have accredited that our products are sole  
B2B products. 

    

19.2 

 

EU, Norway, Island, and Liechtenstein (not Germany): 

It is not allowed to dispose of used electrical equipment as domestic waste.   

The Kling & Freitag AG has thus labelled all products coming from EU-Member coun-
tries as well as Norway, Island and Liechtenstein (except Germany) mentioned in the 
WEEE from 08/13/2005 onwards with a sign with a crossed out waste bin and a white 
bar below. This sign indicates that the disposal into the domestic waste is prohibited 
and that the product has been put into circulation at the 08/13/2005 earliest.   
Unfortunately the European directive WEEE has been complied with implementing 
different national provisions of law throughout all member countries, which makes it 
impossible for us to offer consistent solutions for the disposal throughout Europe.  
Responsible for complying with these provisions of law is the local distributor (importer) 
of each country.  
For proper disposition of used products in accordance with these local provisions in 
the mentioned countries of the European Union (except Germany) please ask your 
local dealer or the local authorities.  

19.3 

 

Other countries 

For proper disposition of used products in accordance with local provisions in other 
countries please ask your local dealer or the local authorities.  

 

 

 

Summary of Contents for LINE 212-6-SP














































Reviews: