background image

Page 18 of 

21

Version 1.0

  © KLING & FREITAG GMBH

User's Manual 

CA 106 PRO

1.0

23.10.2020

10/23/20

K&F

 CA 106 PRO

11

Operation in a Setup with K&F Subwoofers

The K&F CA 106 PRO speaker was designed and developed as a midrange/tweeter system.
When using it as a main sound-reinforcement system, we recommend using an additional K&F
subwoofer. 
We recommend using subwoofers from our K&F NOMOS or K&F PASSIO SUB ranges. 
Example configurations: 

(1x) K&F CA 106 PRO
(1x) K&F NOMOS LS2

1 K&F CA 106 PRO
1 K&F PASSIO SUB 12
or
1 K&F PASSIO SUB 15

All setups depend on their intended use, the required beamwidth, and the on-site conditions. 

12

Maintenance

In addition to the instructions given here, please also read carefully those in the manuals of any
mounting accessories used.

Perform a visual inspection before each installation.

Visually inspect the entire setup every six months. 

When performing those checks, particularly look for deformations, cracks, dents, damage 
to threads, and corrosion. Also check slings and lifts (e.g. shackles, chains, and steel ropes) 
carefully for wear and deformation.

 Many countries require regular inspection of mounting components and accessories. An 
additional annual inspection is typically required to be performed by a technical expert. 
Moreover, a legally certified or official authority must perform a detailed inspection every 
four years.

Therefore, be sure to maintain an inspection log. Enter the values determined for each 
speaker and accessory during the periodic checks into this log. This way, relevant data are 
always at hand in case of inspection. This inspection log book shall be updated with the 
inspection steps, test intervals and parts lists.

If necessary, use multifunction oil for care.

To have the acoustic foam replaced, send the grille including the foam layer to
KLING & FREITAG GMBH. We will then replace the foam layer with a new one at a fixed charge
and return your grille. 

WARNUNG

Risks imposed by undetected damages

The inspection must be carried out by a qualified expert.

If as a result of these checks any uncertainty should arise with regard to safety or defects 
are found, don’t use the speaker any longer. Contact your retailer.

Be sure to use self-locking screws no more than five times. Using them more often may 
result in screws loosening in operation. If in doubt, use new screws. Never use other types 
of screws.

All repair work must be performed by Kling & Freitag after evaluation carried out by 
engineering.

Summary of Contents for CA 106 PRO























Reviews: