Data ultimo aggiornamento: 04/04/2018
Pag. 32 di 60
PLANETARY ACTIVATION
With the clutch selector in position "STOP" the engine turns in neutral and does
not transfer the motion to the tools through the Planetary.
By turning the clutch Selector [photo 13 – A] in "START" position [Photo 8 – A]
the clutch is engaged and starts the Planetary rotation[Photo 6 – C] and utensils
[Photo 6 – A].
ATTENTION! The Planetary activation, which is obtained by rotating the selector
switch to "START" clutch may cause an initial shake of the machine. At this stage
keep hands firmly on the handle and take adequate and stable posture.
ATTENTION! With the rotation of the planetary and of the tools the surface
treatments begins.
The lever switch [Photo 13 – B] lifts and lowers the machine. This switch controls
the electric actuator showed on this picture [13 – C]. The actuator is provided
with limit switches that automatically switch the electrical contract when piston is
on the extreme positions.
REGOLAZIONE DEL FLUSSO DELL’ACQUA / WATER FLOWING
REGULATION
FLUSSO
ACQUA
: Nel caso di lavorazioni con acqua la portata può essere regolata
tramite il rubinetto (13) posto nella parte anteriore della macchina indicato in figura.
WATER FLOWING
: In case of working with water, the water flow can be regulated
with the tap placed on the front of the machine as pictured (13).
ESTRAZIONE DELLA RUOTA ANTERIORE / FRONT WHEEL REMOVAL
La ruota anteriore serve per il trasporto e per alleggerire la pressione di contatto della macchina
per alcune applicazioni. L’estrazione di quest’ultima è immediata, basta allentare la manopola a
ripresa indicata di fianco (14). Con la ruota anteriore estratta è possibile variare la pressione di
contatto sulla punta della macchina; la pressione sulla punta aumenta man mano che si alza l’attuatore.
Front wheel is needed for transporting and make the contact pressure of the machine
lighter for some applications. To remove the front wheel, simply loosen the knob as pictured (14).
While the front wheel is off, it is possible to vary the contact pressure of the tip of the machine: the
pressure on the tip increases as the actuator is lifted.
13
14
