Klimawent BIG-2000-N, Use And Maintenance Manual, Page: 3 / 20

3
26.06.2019
Filtering unit
BIG-2000-N
1. Introductory Remarks
The purpose of the present User’s Manual is to supply User with directions within the range of
application, installation
,
start-up and the operational
use of the
BIG-2000-N filtering unit .
Installing, start up and operational use are exclusively admissible after getting acquain-
ted with the contents of the Use and Maintenance Manual
.
With regard to continuity of work carried on improvement of our products, we reserve for our-
selves the revision possibility of the draft and technological changes improving their functional
features and safety.
The
construction of the
BIG-2000-N filtering unit meets the requirements of the current state
of technology as well as the safety and health assurances included in:

2006/42/EC
Machinery Directive of the European Parliament and of the Council of 17 May,
2006 on machinery
– amending the 95/16/EC (recast)
/
Journal of Laws EC L157 of 09.06.2006, page 24
/

2014/35/EC Directive
of the European Parliament and of the Council of 26 February, 2014
on the harmonisation
of the laws of the Member
States
relating to
the making available on the
market of electrical equipment designed for use within certain voltage limits.
/
Journal of Laws EC L96 of 29.03.2014
/
The appliance meets the requirements included in:

2009/125/EC (ErP)
Directive of the European Parliament and of the Council of October 21
th
,
2009 establishing a framework for the setting of ecodesign requirements for energy-related
products /
Journal of Laws L285 of 31.10.2009
/

327/2011
( EU ) Commission Regulation of March 30 th , 2011 on
implementing the
2009/125
/EC Directive of the European Parliament and of
the Council
with regard to ecodesign requi-
rements for fans driven by motors with an electric input power between
125W and 500 kW /
Journal of Laws L90 of 06.04.2011
/
The device has been constructed and produced on the basis of following harmonized standards:

EN ISO-12100:2012
–
“Safety of machinery –
Basic concepts, general
principles
for design. Risk assessment and risk reduction”.
 EN 60204-1:2018-12
–
“Safety of machinery – Electrical equipment of machines.
Part 1: General requirements”.

EN ISO 13857:2010
–
“Safety of machinery – Safe distances to prevent hazard
zones being reached by upper and lower limbs”.

EN 60529:2003/A2:2014-07
–
“Degrees of protection provided by enclosures
(IP Code)
”

EN 61439:2011
–
“Low-voltage switchgear and controlgear assemblies
– Part 1: General resolutions”.