Klimawent BIG-2000-N, Use And Maintenance Manual, Page: 16 / 20

16
Filtering unit
BIG-2000-N 26.06.2019
Operational Instruction of the Compressed Air Tank
I. Technical data of the compressed air tank
– type of the tank: 35 – 35,
– maximum operational pressure: P
s
= 10,0 bar
– maximum operational temperature:
T
max
= +100

C
– minimum operational temperature:
T
min
= -40

C
– capacity of the tank: V = 15 litres
II. Range of application
The tank is designed for use in pneumatic installations. The operating medium is the compressed
air of operational pressure equal or less then pressure
P
s
.
III. Conditions of installing and maintenance
1 . The compressed air tank can be installed in the pneumatic installations where the operational
medium is the compressed air
and the highest pressure does not exceed the P
s
operational pres-
sure.
This condition ought to be fulfilled by the company who is installing the tank .
2 . The tank ought to be installed in a way providing its durability, tightness and in such a configura-
tion that the outlet connection is located at the lowest bottom location.
3 . The tank has to be fastened to the supporting structure and positioned in such a location where
it would not be exposed to outer factors and to direct mechanical destructions and during the ope-
rational use it should not be exposed to vibrations that could contribute to a fatigue crack.
4 . During any technical revision or repair of the pneumatic installation it is important to check the
correctness and state of the tank mounting (screw connections,
welds and their technical state).
5 . If there is a damage in the wall (
crack
, indentation
,
infringement
of the mounting stability, etc.) and
the tank was relatively exposed to extreme temperatures that could change the structure of the
wall material – immediately the tank ought to be excluded from operational use .
6 . Do not dismantle the tank or its structural parts, while it is under pressure or the supply valve of
compressed air is open.
Any activities related to maintenance or cleaning the tank ought to be executed when the tank is
emptied and the control unit is switched off.
7 . Do not execute any welding operations close to the tank.
8 . During the technical revisions, the tank ought to be emptied from condensate water through the
condensate drainage device in the bottom part of the tank.
9 .
For the compressed air tank is foreseen
40
years of operational use. After this period the tank should
be excluded from its operational use. The withdrawn from operation tank must be destroyed and
its designations / markings must be wiped out, so the tank would never be returned to operation.
Do not introduce
any
constructional changes / modifications on the compressed air tank,
its application in contradiction with its purpose is forbidden.