7
8. How to set timer start and timer stop
a) Press
to activate ‘timer start’ setting: hour and minute digits will be flashing
together.
b) Press
again to modify the hour setting: the hour digits will flash meaning they are
ready to be modified by pressing ▲ or ▼.
c) Press
again to modify the minute setting: the minute digits will flash meaning they
are ready to be modified by pressing ▲ or ▼.
d) Press
to confirm setting - display will return to standby status. ‘Timer start’ green
indicator light will light up to show the starting time has been set.
e) Repeat the same procedure using
instead of
to set ‘timer stop’. ‘Timer stop’
red indicator light will light up to show the stopping time has been set.
Note:
‘timer start’ and ‘timer stop’ can be set together or separately (i.e. it is possible to set
‘timer start’ only and then stop the unit manually or set ‘timer stop’ only and start the unit
manually).
9. How to cancel ‘timer start’ and ‘timer stop
Press
to activate ‘timer start’ or
to activate ‘timer stop’: the corresponding indicator
light will be flashing. Press
to cancel ‘timer start’ or ‘timer stop’.
INFO:
The parameter can be changed by a skilled person. A code is needed to do so.
The procedure for this is in the "Main Manual".
The keypad can be locked to prevent unauthorized use or changes of the heat pump.
The procedure for this is in the "Main Manual".
If the control panel is locked, your dealer can advise you how to unlock it.
10
.
Recommendations
Important: failure to comply with these recommendations will invalidate the warranty
Note: non-compliance with one or more of these recommendations can damage the
heat pump beyond repair. Always install water-treatment equipment (e.g. chemical
dosing systems) after the water outlet of the heat pump, especially if the chemicals are
automatically added to the water (e.g. automatic chemical dosing systems).
A check valve should also be installed between the outlet of the heat pump and the
water-treatment equipment to prevent products from flowing back into the heat pump if
the filter pump stops.
Timer start
indicator
Timer stop
indicator
