background image

www.klever-mobility.com

www.klever-mobility.com

28

29

again. After you have inserted the E-KEY, you can take it out 
and put it into your pocket. Then the option menu shows 
again the NO/YES-choice for the Motor Lock etc., etc.

Setting MORE > Display > Sound

The system’s acoustic sound can be turned ON or OFF.

Setting MORE > Display > Brightness

The brightness of the display can be adjusted.

Setting MORE > Display > Light

Setting for 25 km/h EPAC-models: Head and tail light will be 
turned on automatically when the system will be turned on. 
You can decide to turn off the head and tail light while the 
system remains on. 
Setting for 45 km/h speed pedelec models: the turn ON/OFF-
option is not available for speed pedelecs. These are Type-
approval vehicles and therefore they must carry a head and 
tail light under all conditions. Even when standing still they 
must carry a stand light. 

Setting MORE > Bluetooth

By Bluetooth connection you can use your smart phone as a 
dashboard to show the information from the bike system.

Setting MORE > Reset Kcal

The Kcal can be reset to zero.

Setting MORE > Manual overwrite

This setting can be adjusted by your Klever dealer

Setting MORE > System

This is the system information relevant for your Klever dealer 
to execute a system diagnosis.

Setting MORE > Factory default

You can set your bike back to factory default settings.

6.5 Rechargeable battery

Your X Speed model has a high-quality lithium-ion battery 
with a big capacity. The X Alpha 45 and the X Pinion 45
models have a battery capacity of even 1200 Watthours. For 
technical details, please refer to section 11. Technical data. 
The status of the battery can always be checked through the 
LED light button, next to the charging socket of the battery 
(image 31). Press the button and the LED will light up either 
red, yellow or green. If no light, then the battery could be 
broken. Please have your local dealer check the battery.

Red

Capacity <

 

35%, battery should be charged

Yellow

Capacity 35 

 75

%, battery can be charged

Green

Capacity >

 

75%, battery can be charged

The battery is automatically protected from overheating, 
overcharging and deep discharging. It is very user-friendly, very 
practical, easy and simple to handle. Nevertheless, you should 
consider some important things in order to maximise the life and 
performance of the battery.
• Since the lithium-ion battery has no memory effect, you can 

charge it at any time. Even if it is not completely discharged. 
In practice, it has been shown that it is even better to charge it 
again after short distances.

• Your battery has a lifetime of 700 charging cycles. One charging 

cycle means a full charge of the battery (0 – 100% capacity). 
Partial charges can be done more often.

• When the battery is not being used for a long time (more than

2 months), it should be recharged as a low amount of self-
discharge is common.

• Store the battery, if possible, in a dry, cool and dark place. The 

ideal storage temperature is between 5 – 20 °C. Avoid exposing
the battery to direct sunlight over a long time. Temperatures 
over a longer period of more than 45 ° C or below - 10 ° C can 
cause permanent damage.

• In winter, you should never start with a cold battery. The

capacity of a cold battery is significantly reduced and 
consequently will have a lower range.

• A battery which is exposed a long time to frost, should be 

gently heated in the ambient temperature of a heated room, 
before starting.

• In case you need to park your X Speed model outside for a long 

time during the cold season, remove the battery and store it in
a heated room. Since the battery is very easy to remove, this 
will be no problem.

Rechargeable battery

Display

Image

 31

Charging 
socket  
LED

Summary of Contents for X Alpha 45





































Reviews: