KLEVA QPPS001 User Manual Download Page 5

3

INSTRUCTIONS

Fabric Setting Chart

Temperature 

Setting

Fabric

Instructions

Steam selection

SYNTHETIC

Delicates

Cotton/Linen

Synthetics, Nylon, 

Polyester

Wool, Silk

Cotton, Linen

Dry Ironing

Steam ironing on  

the under side of 

the fabric

Steam ironing 

Ironing Temperature Setting Guide 

Step 1 -

 Follow the ironing instructions on the 

garment label. If there is not any instruction label on 

the item, but you know what kind of fabric it is, please 

refer to the fabric setting chart described in this 

instruction manual.

Step 2 -

 The 

Fabric Setting Chart

 is only valid for 

plain fabrics and not for materials which have textile 

finishes (eg. glosses, crinkles) which have been 

applied. It is best to iron these at a lower temperature.

Step 3 -

 Firstly, sort laundry according to ironing 

temperature setting guide: wool with wool, cotton 

with cotton etc. 

Step 4 -

 The iron heats up quicker than it cools down. 

Therefore start ironing the articles that need to be 

ironed at the lowest temperature first. Eg. an item 

made from synthetic fibers.

IRON TEMPERATURE

DIAL

Summary of Contents for QPPS001















Reviews: