Klemsan TES-4, User Manual

Page: 5 / 35

SECTION 1 GENERAL INFORMATION
1.1 Proper Use and Safety Conditions
o
Installation and connections should be established in accordance with the
instructions set out in the manual by authorized persons. Unless the
connection is built properly, device should not be operated.
o
Before wiring the device up, make sure that energy is cut off
o
Use a dry cloth to remove the dust from the device/clean the device. Avoid
using alcohol, thinner or a corrosive material
o
Device should be engaged only after all the connections are made.
o
Do not open the inside of the device. There are no parts which the users
can intervene inside.
o
Device should be kept away from humid, wet, vibrant and dusty
environments.
1.2 General Futures
TES-4 Order No: Explanation:
601410
TES-4 (Transparent Ethernet/Serial Converter)
TES is a transparent converter that provides bidirectional transmission with RS485 interface
running on server role using TCP / IP infrastructure. In this way, it is possible to control
and monitor serial devices remotely, regardless of communication protocols.
Additionally, the configuration data of the device can be read and written in USB or
JSON format.
TES generally has the following features:
•
Runs in the server role
•
Supports bidirectional communications
•
Supports 2 remote connections
•
Works as a transparent converter
•
Supports Ethernet 10/100 Base Tx
•
Can be configured over USB and Internet
•
Can be change the serial communication settings instantly
•
Access to all configuration functions and information through fully open JSON Rest API
•
Software update via USB
The manufacturing company may not be kept responsible for unfavorable incidents
that arise out of the failure to follow the above cautions.
Transparent Ethernet /
Serial Gateway
TES
Transparent Ethernet /
Serial Converter
5
SECTION 1 GENERAL INFORMATION
TES
l
l
l
l
l
l