9
Charge Plate Mode
Afterwards the starting voltage can be set
Confirm the displayed value by pressing
«A»
or press
«B»
to select a new one. Values are
switched in the following order:
Next the stop voltage is set:
Confirm the displayed value by pressing
«A»
or press
«B»
to select a new one. Values are
switched in the following order:
Afterwards the time period for the offset voltage measurement is inquired:
Confirm the displayed value by pressing
«A»
or press
«B»
to select a new one. Values are
switched in the following order:
The selected parameters for
START
,
STOP
and
OFFSET
are displayed for 3 seconds:
The device inquires whether the parameters are right:
Confirm the displayed value by pressing
«A»
or press
«B»
to change the values again.
TIMER + OFFSET OK?
A<YES
NO>B
TIMER: 1000-100V
OFFSET: 1 min
OFFSET: 10s
A<OK
CHANGE>B
STOP: U = 100V
A<OK
CHANGE>B
START: U = 1000V
A<OK
CHANGE>B
Summary of Contents for CPM 374
Page 16: ...16 Manual CPM 374...
