background image

15

 

Remove thermocouple before switching meter to other 

       measurement functions.

 

The thermocouple included with the original purchase is

       suitable for temperatures below 356°F / 180°C only. To measure

       higher temperatures, a K-type thermocouple with 

       the appropriate measurement range should be used.

OPERATING INSTRUCTIONS

FREQUENCY / DUTY-CYCLE

1. Insert RED test lead into VΩ jack 

5

 and BLACK test lead into

COM jack 

4

, and rotate function selector switch 

2

 to the

Frequency/Duty-Cycle 

 setting.

NOTE:

 The meter defaults to Frequency testing in this mode. To enter 

Duty-Cycle testing mode, press the "SEL" button 

10

 once. Ensure 

that the appropriate icon (either 

Hz

 or 

%

) appears on the display.

2. Measure by connecting test leads across the circuit.

TEMPERATURE

1. Insert K-type thermocouple into the VΩ 

5

 and COM 

4

 jacks, and

rotate function selector switch 

2

 to the Temperature   setting.

NOTE:

 The meter defaults to Fahrenheit scale in this mode. To enter 

Celsius scale, press the "SEL" button 

10

 once. Ensure that the 

appropriate icon (either 

°F

 or 

°C

) appears on the display. Default 

temperature scale may be changed by powering on the meter with the 

"HOLD" button 

9

 depressed.

2. To measure temperature, make contact between the thermocouple

tip and the object being measured. When thermocouple tip and

object are in thermal equilibrium, the measurement on the display

will stabilize. The meter will auto-range to display the measurement

in the most appropriate range.

RED

BLACK

K-Type Thermocouple

with Adapter

Thermocouple

Adapter

Red lead

Black lead

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for MM400


















Reviews: