background image

SAFETY 

Your risk from these exposures varies, depending on how often you do this type of 

work. To reduce your exposure to these chemicals: work in a well ventilated area, 

and work with approved safety equipment, such as those dust masks that are    

specially designed to filter out microscopic particles.
   •   Avoid prolonged contact with dust from power sanding, sawing, grinding, 

drilling, and other construction activities. Wear protective clothing and wash 

exposed area with soap and water. Allowing dust to get into your mouth, eyes,  

or lay on the skin may promote absorption of harmful chemicals. 

WARNING

: Use of this tool can generate and/or disperse dust, which may cause 

serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved  

respiratory protection appropriate for the dust exposure. Direct particles away from  

face and body.

WARNING

: Always wear proper personal hearing protection that conforms to  

ANSI S12.6 (S3.19) during use. Under some conditions and duration of use, noise  

from this product may contribute to hearing loss.

CAUTION

: When not in use, place tool on its side on a stable surface where it will 

not cause a tripping or falling hazard. Some tools with large battery packs will stand 

upright on the battery pack but may be easily knocked over.

Important Safety Instructions for All Battery Packs

When ordering replacement battery packs, be sure to include the catalog number and 

voltage. 
The battery pack is not fully charged out of the carton. Before using the battery pack and 

charger, read the safety instructions below and then follow charging procedures outlined.
• 

DO NOT

 charge or use the battery pack in explosive atmospheres, such as in the  

  presence of flammable liquids, gases or dust. Inserting or removing the battery  

  pack from the charger may ignite the dust or fumes.
• 

NEVER

 force the battery pack into the charger. Do not modify the battery pack in  

  any way to fit into a non-compatible charger as battery pack may rupture causing  

  serious personal injury. Consult the chart at the end of this manual for compatibility  

  of batteries and chargers. 
•  Charge the battery packs only in designated DeWalt chargers.

 

 

 

 

 

 

 

 

 

www.

.com

[email protected]

1.800.561.8187

Summary of Contents for DEWALT BAT20-LW























Reviews: