SL6KLN1AU_ara_en_a_638_X.doc – 15.02.08
Seite 5 von 49
3 OPERATION
3.1 Control
panel
The control panel here has maximum features
3.2 Display
3.2.1
Display control (on top)
A 2½-digit 7-segment display enables programme run times, etc., over
99 min. to be displayed. The remaining running time is recalculated at
the end of the heating positions. If deviations occur on account of the
Aqua sensor decisions, water supply temperature, quantity of utensils,
etc., the remaining running time is corrected in these positions. Time
jumps may occur.
Low salt and rinse-aid indicators are integrated in the display.
3.2.2
Display (at front)
The following symbols can be indicated via the optional display
module:
(A)
Timer programming symbol
(B)
Check water supply (optional)
(C)
Sensor check
When a programme starts, the values of the NTC and the
Aqua sensor are checked. If one of the components is
defective, measurements are outside the specified tolerance
range, therefore only “sensor” is displayed.
(D)
Spray pressure symbol
The spray pressure symbol changes depending on the
selected programme, Aqua sensor decision and position in the
programme sequence. 3, 5 and 7 jets are displayed. ( see
also
Water points
)
