SL6KLN1AU_ara_en_a_638_X.doc – 15.02.08
Seite 34 von 49
6 REPAIR
6.1 Operating
module
6.1.1 Removal
►
Remove the furniture front (if fitted)
►
Remove outer door
►
Loosen support plate and tilt forwards
►
Press both catches (1) for the module holder inwards
►
Release middle catch (2)
►
Pull module down out of the support plate
6.1.2 Installation
►
Push module from below into the support plate until the two
catches on the module housing engage in the support plate.
When installing, ensure that
►
catches on the support plate are not bent.
►
module is locked correctly in the support plate
►
Connect front display module (if fitted)
►
Engage support plate in the fascia hood
►
Install fascia and outer door
