CONNECTION OF THE OVEN
L
N
IMPORTANT
If the oven is to work properly, the kitchen housing must be suitable. The panels of the kitchen unit
that are next to the oven must be made of a heat resistant material. Ensure that the glues of units
that are made of veneered wood can withstand temperatures of at least 120 ºC. Plastics or glues
that cannot withstand such temperatures will melt and deform the unit
2
nce the oven has
been lodged inside the unit, electrical parts must be completely insulated. This is a legal
safety requirement. All guards must be firmly fixed into place so that it is impossible to remove them
without using special tools. Remove the back of the kitchen unit to ensure an adequate current of
air circulates around the oven. The
oven
must have a rear gap of at least 45 mm.
SECURING THE OVEN TO THE CABINET
1.
Fit oven into the cabinet recess.
2.
Open the oven door
3.
Secure the oven to the kitchen cabinet with tw
o
distance holders "A" which fit the holes in the
oven frame and fit the two screws "B".
14
