disappears until the time cooking starts.
You can set a time up to 23.59 hours after the time obtained by adding the cooking period
The oven will start operating at the time calculated by deducting the cooking period from the set finishing
time
and will stop at the set finishing
time
The timer will give an audible warning and the symbol
A
on
the display screen
will
begin to flash
.
After
turn
ing the cooking function and oven
temperature
to
position pressing any button for less than 3 seconds will stop the audible warning.
Pressing" " for more than 3 seconds set
s
the oven to Manual mode again to use the oven.
Please note
Once full
automatic mode
is set
the time cannot be changed
To change the duration or end
times reset the automatic mode by performing the steps above again.
General Notes:
utton to confirm, the
The symbol
button until you see
D
ur
on the timer
screen
Use
button
s
to adjust
the
cooking
button to confirm,
will
appear on
the timer
screen,
u
se " +" "- " button
s
to adjust finishing time
.
Press "
will appear on the screen and the symbol
A
will
display
continuously on the
screen
button
until you
see
End
on the
timer screen
When you
see
End
on
" b
1>
Long pres s
on
or
for more than
seconds
the
time
will progressively and rapidly increase o r
decrease
2>
When
the time functions
are being set,
if
t
h ere is
no
operation for 5
m
inutes
then
the oven
will
return to
manual mode.
!
When setting each
of
the current setting and
the ti
me f
unctio
n
s
,
pr
essi
ng o
n
the oven enters manual mode.
for more
than 3
s
econds
will
cancel
fo r
mor e
tha n
3 se co nd
s
a beep sound s
,
First
Press
period for the food you wish
to cook . Press
the screen and the symbol
A
will
display
continuously on the
screen.
Second
keep pressing
the
!
During time functio n
setting
pressing on
DQG
the cur
r
en t
time function
setting
is cancelled and the oven enters standby mode.
!
It is recommended to
run the oven elements for
minutes at
degrees to burn
off any
residue
from their
surfaces
6> If the unit is not in use, always set the knobs to "0".
Full Automatic Programming
:
This function is used to cook
at a later
time with a
set
duration
The food to be
cooked
is put into the oven
The oven is adjusted to the desired cooking
function
and the
oven temperature is adjusted
to the
level
suitable for
the food to be
cooked
To set the duration and end times:
knobs
the
current time
current time
to the
current time of day.
11
