130717
External interferences (for example electrical wiring)
could induce signalization of different faults.
For example.....
- switch the appliance off, and wait for a few
seconds;
- switch the appliance back on and repeat the
drying program.
If the fault continues call an authorised service
agent.
Warranty shall not apply in case of failures due to
interferences from the environment (lightning stroke,
power supply circuit faults, natural disasters).
4
Troubles
Trouble
Check
Appliance does not
work:
• If there is current in the socket and if the fuse is
functioning.
• If the plug is correctly inserted into the socket.
There is current in
the socket, but the
drum is not rotating:
• If the door is closed tightly (press it towards the
appliance).
• If the program runs according to instructions.
• If the container is full.
• If appropriate drying time is selected.
Laundry is not dry:
• If the filter is clean.
• If the condensation device is clean.
• If the room is adequately ventilated.
• If the amount of laundry to be dried is not too large.
• If the laundry loaded in the drum has not been spun
enough or if appropriate drying time has been set.
• If the room is too hot (over 25°C).
The condensation is
inadequate:
• If the room temperature is too high.
• If the condensation device is clean.
Unevenly dried
laundry:
• If the amount of laundry to be dried is not too large.
• If there are only large pieces of laundry (large and
small pieces should be dried together).
• If different fabrics are dried together (group the
laundry according to the type of fabrics).
Summary of Contents for KED601
Page 1: ...Instructions for Use KED601 Condenser Dryer ...
Page 30: ...130717 30 ...
