130717
After five drying cycles you need to do the
following (condenser appliances only):
•
remove, clean/wash and refit the filters on the
interior side of the door and the bottom side of
door opening;
•
remove, clean/wash and refit water condenser;
•
wipe the inside of the water condenser
compartment with a damp cloth;
•
wipe the entire back of the water condenser
housing with a damp cloth (reach deeply into the
condenser compartment with your hand to touch
the back wall of the compartment!);
•
wipe all sealings and sealing surfaces of the
condenser, condenser housing and condenser
door with a damp cloth.
•
Before replacing the bulb disconnect the power
cord from the wall socket.
•
Open the door.
•
Unscrew the cover of the bulb (inside the door
opening).
•
Replace the bulb. The bulb must be of the same
type and power as indicated on the bulb and on
the protective cover (max. 10 W).
•
Reinsert and tightly screw the cover back. Check
if it seals well, or moisture may penetrate the
interior and cause short circuit.
3
Replacing the bulb
(only with some models)
Summary of Contents for KED601
Page 1: ...Instructions for Use KED601 Condenser Dryer ...
Page 30: ...130717 30 ...
