A D D I T I O N A L I N F O R M AT I O N
ANY PROBLEMS
If the clothes are not dry after normal drying time:
–
Check that you used the correct heat setting.
–
Check that you have not set the timer within a cool down period.
–
Check that the lint filter has been cleaned. A blocked filter will restrict the airflow.
–
Check that the condenser unit and associated duct work are clean. If blocked these will
restrict the airflow.
–
Check that your dryer is heating - below the door to the left side, should feel warm to the
touch after the first 10-15 minutes of its programme. Failure to heat may indicate the safety
cut-out has operated. To reset, simply press the red button at the rear of the machine. If it
has operated then a sharp “click” will be heard. This cut-out only operates if the airflow is
severely restricted so make sure the filter is clean and that all other restrictions are
removed before re-starting.
If the cut-out continues to operate after checking the above points, you should contact your
service agent.
If your machine does not work check the following before calling a service engineer:
–
Check that there is a supply of electricity.
–
Check that the door has been properly closed and the machine is switched on.
–
Check that the condenser has been pushed back into the machine.
–
Check the plug internal connections.
TECHNICAL DATA
OVERALL DIMENSIONS:
Height: 85 cm
Width: 59.5 cm
Depth: 58 cm
MAXIMUM DRY WEIGHT LOADS:
Cotton 6kg
(for minimum creasing 2kg)
Delicates 2kg
For electrical ratings see plate on back of dryer.
For Model No. see serial plate inside door (needed when requesting service).
Room temperature range 5˚C to 30˚C.
Your washing machine should have a spin speed of not less than 800rpm.
