7
9 To change control panel
Your dryer is supplied with the Control Panel at the top. An additional Panel Infill
is supplied which allows use of the dryer with the Control Panel at the bottom. This
may be fitted as follows:
Grip the timer knob and pull to remove it from the dryer.
Remove the fitted panel by gently levering its bottom edge away from the dryer
using a flat-bladed screwdriver. The panel is clipped at the four points indicated.*
*Clip points
Hook the top edge of the replacement panel into the dryer, and clip in the bottom
edge at the four points. Ensure that the three location pegs are engaged. Replace
the timer knob ensuring that its flat is aligned with the flat on the timer shaft.
10 To wall mount
The dryer may be wall mounted with the control panel at the top or at the bottom.
This will require a Wall Mount Kit. Please obtain this kit from your Kleenmaid
dealer. Instructions for its fitting will be enclosed.
