Kleenmaid KED300 Instructions For Use Manual Download Page 5

4

3 Operation

3.1 Roll dripping wet articles in a towel to remove excess water.

Sort out the clothes into groups of similar fabrics and colours. Check the care label
inside the garment.
Delicate articles e.g. tights should be placed inside a pillowcase.
It is better to dry small and large articles together.

3.2 Open the door.

Load clothes loosely into the drum.
Load sheets first starting with one corner.

3.3. Close the door. 

Dry your hands.
Check that the timer is in the “ ” position. 
Plug in the machine.

3.4  Select correct heat position (see programme chart on control panel).Select Anti-

crease if required.
Set the timer to the correct position (see programme chart on control panel). The
drum will now begin to rotate and stop when the timer automatically reaches the
‘O’ position.

3.5 When drying large items such as sheets, we suggest you stop the dryer to

redistribute the load.
To stop the machine during the middle of the programme simply open the door;
the drum will stop rotating automatically and restart when you close the door. To
lengthen or shorten the programme, reset the timer knob.

3.6  Before removing the dried clothes clean the filter by removing any thread or fluff

by hand or with a soft brush or cloth. The filter is not removable.

3.7 Disconnect from the electricity supply.

4 Care labels you may find on your fabrics

‘Tumble drying beneficial’

‘Do not tumble dry’

‘Dry flat’

Summary of Contents for KED300











Reviews: