8
37005
Water Temperature
Cold:
Same as cold water supply.
(Recommended cold water
temperature is 50 to 75°
Fahrenheit, 10 to 23.8° Celsius).
Hot:
Same as hot water supply.
(Recommended hot water
temperature is 140 to 150°
Fahrenheit, 60 to 65.5° Celsius).
Warm:
Mixture of hot and cold water.
(Warm water temperature is
dependent upon the water
temperature and the pressure of
both the hot and cold water
supply lines.)
IMPORTANT: Turn off water
supply faucets after check-out
and demonstration. Owner should
turn off water supply at end of
each wash day.
Water Supply . . .
維
WARNING
Under certain conditions,
hydrogen gas may be
produced in a hot water
system that has not been
used for two weeks or
more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water
system has not been used
for such a period and
before using the washer,
turn on all hot water faucets
and let the water flow from
each for several minutes.
This will release any
accumulated hydrogen gas.
THE GAS IS FLAMMABLE,
DO NOT SMOKE OR USE
AN OPEN FLAME DURING
THIS TIME.
Water supply taps must fit
standard ¾ inch (19.05 mm)
B.S.P. female garden hose
couplings. DO NOT USE
SLIP-ON OR CLAMP-ON
CONNECTIONS.
NOTE: Water supply faucets
should be readily accessible to
permit turning them off when
washer is not being used.
Water level in washer is controlled
by a water level switch.
Water Pressure
Pressure must be a minimum of
20 to a maximum of 120 pounds
per square inch (137.9 to
827.4 kPa) static pressure
measured at the faucet.
NOTE: Water pressure under
20 pounds per square inch
(137.9 kPa) will cause an
extended fill time in the washer.
C
H
W187IE3A
WATER SUPPLY FAUCETS
COLD WATER
CONNECTION
WATER MIXING
VALVE
HOT WATER
CONNECTION
WATER INLET HOSES
