Kleenmaid DW6020, Instructions For Use Manual

Page: 31 / 40

The machine will dispose of all the water in this 1 minute; the time is reset and
completion symbol is illuminated.
Switching off the Machine
. When the Completion symbol is illuminated, switch off your machine by pressing
the On/Off button.
. Later, unplug your machine and turn off the water inlet tap .
NOTE 1: A few minutes after the program finishes and the Completion lamp is
illuminated, you may open the door slightly and leave it ajar in order for the drying
process to be faster.
NOTE 2: If the machine door is opened or a power failure occurs during washing, the
machine will proceed from where it stopped after the door is closed or power is restored.
Program Change
If you want to change the program while washing is proceeding;
. Press on Start/Standby button. 3
. Select the new program
using Program button. 5
. The newly selected program continues from where the previous one was left.
. Start the programme by pressing the Start/Standby button again. 3
Cancelling programme
If you want to cancel the program while another one is proceeding;
. Hold the Start/Standby button for 3 seconds. 3
. The display will count down from 3 to 1 and when the countdown is over, the
remaining time will be displayed as 1 minute.