10
5/ DETERGENT PRODUCTS AND ADJUSTING THE WATER SOFTENER
Important:
It is very important to set the water softener correctly.
- If the setting is too low, there is the risk of chalky marks appearing.
- if the setting is too high, there is the risk of causing clouding of the glasses.
If you relocate, adjust the water softener setting as required.
• Traditional tablets
Non-multipurpose tablets should be placed in the external compartment (Fig 11) or, for optimum
performance, pull out the dispenser drawer and lay the tablet inside (Fig 12).
• Powders or liquids (Fig 10)
Fill at least up to the minimum mark for slightly dirty crockery and to the maximum mark for dirty
crockery. If the crockery is very dirty and for programmes with a pre-wash we recommend that you
add 5g of detergent (a dessert spoonful) into your dishwasher’s tub in accordance with the pro-
grammes table.
Important:
Keep these products out of children’s reach and away from dampness.
Only use products specially designed for dishwashers.
Fig. 11
Fig. 12
Fig. 10
• FOR TRADITIONAL PRODUCTS
• Your machine must be specially adjusted to use traditional products.
• Proceed as follows to adjust the water softener on the control panel:
— This is set using the
“Set”
button; a long press on the but-
ton provides access to the menus. Short presses are then
used to set the water softener.
— The setting is shown on the screen as a value from
c0
to
c5
.
— Turn the programme selector to adjust this setting in one
direction or the other (to suit the hardness of the water).
— If the programme selector is not turned again, the selected setting is validated automatically
after 10 seconds.
T
Te
es
stt s
sttrriip
p
H
Ha
arrd
dn
ne
es
ss
s
0-10°F
10-25°F
25-40°F
40-55°F
55-70°F
> 70°F
S
So
offtte
en
ne
err
s
se
ettttiin
ng
g
T
Trra
ad
diittiio
on
na
all
p
prro
od
du
uc
ctts
s
Quick
AUTO
Opti
60
Nb. Factory setting :
c3
c0
cI
c2
c3
c4
c5
