Kleenmaid Dishwasher Collection, Instructions For Use Manual

Page: 12 / 28

aus
12
auto 3in1
The use of so-called combined detergent
products may make the use of rinse aid
and/or salt unnecessary.
There are currently several types of
combined detergent products available.
2in1: They contain detergent and rinse
aid or salt function.
3in1: They contain detergent, rinse aid
and salt function.
4in1: They contain a detergent,
rinse-aid, salt function and an additional
glass protection component.
In addition, other combined products with
a comparable effect are offered according
to the manufacturer.
>>> Always check the type of detergent
or combined product which you
are using!
Always follow the operating instructions
or the information on the packaging.
The rinse programme is automatically
adjusted in order to obtain the best
possible rinsing and drying result.
Observe the following important
information if using combined cleaning
products:
Regeneration salt is not required up to
a water hardness of 21
_
dH (37
_
fH,
26 _ Clarke, 3.7 mmol/l) only. No other
settings on the appliance are required.
If in doubt, please contact the detergent
manufacturer, especially if:
the utensils are very wet at the end
of the programme.
limescale forms.
Note
Optimum rinsing and drying results can be
obtained by using standard detergents in
conjunction with separate application of
rinse aid.
Observance of the operating instructions
or information on the packaging of the
combined detergents determines their
effectiveness.
Note
Even if the rinse aid refill indicator is lit, the
rinse programme runs correctly when 3in1
products are used.
If the rinse aid refill indicator
6
is
defective and you would like to switch it
off, proceed as follows:
Switching the rinse-aid refill
indicator off or on*
*
some models
You can switch off the rinse-aid refill
indicator
6
if you use a detergent
with integrated rinse-aid.
Close the door.
Press and hold down button A .
Press main switch
1
until the digital
display lights up.
Release both buttons.
The digital display
7
indicates
(rinse-aid refill indicator) and the button
A flashes.
By pressing button A you can switch
the rinse-aid indicator off
or on .
Switch off the main switch
1
;
The setting is saved.
Note
If you use the detergent and rinse aid
separately or switch from combined
detergents to standard cleaning products,
ensure that the rinse aid refill indicator has
been switched on.