1.
If the
supply cord
is damaged or needs replacing,
it must be replaced by the
manufacturer, its service agent or similarly qualified
technician using the
proper tools
in order to avoid a hazard.
2.
If the appliance is being connected directly to the mains supply, an omnipolar
circuit breaker must be installed with a minimum gap of 3mm between the
contacts.
3.
The installer must ensure that the correct electrical connection has been made
and that it complies with safety regulations.
4.
The cable must not be bent or compressed.
5.
The cable must be checked regularly and only replaced by a properly qualified
person.
DISPOSAL: Do not
dispose this product
as unsorted municipal
waste. Collection of
such waste separately
for special treatment is
necessary.
This appliance is labeled in compliance with European directive
2012/19/EC
for Waste Electrical and Electronic Equipment (WEEE).
By ensuring that this appliance is disposed of correctly, you will
help prevent any possible damage to the environment and to
human health, which might otherwise be caused if it were
disposed of in the wrong way.
The symbol on the product indicates that it may not be treated as
normal household waste. It should be taken to a collection point for
the recycling of electrical and electronic goods.
This appliance requires specialist waste disposal. For further
or
more detailed
information regarding the treatment, recover
y
and
recycling of this product please co
ntact your local council, your
household waste disposal service, or the shop where you
purchased it.
Connecting to the
M
ains
P
ower
S
upply
The power supply should be connected in compliance with the relevant standard,
or a single-pole circuit breaker. The method of connection is shown below.
20
