Kleenmaid Automatic dryers, Installation Instructions Manual

Page: 9 / 28

504062
7
Step 4:
Wipe Out Inside Of Dryer
Before using dryer for the first time, use an all-purpose
cleaner, or a detergent and water solution, and a damp
cloth to remove shipping dust from inside dryer drum.
Step 5:
Plug in the Dryer
Refer to Section on Electrical Requirements, and
connect the dryer to an electrical power source.
Step 6:
Check Installation
Refer to Installer Check on the back cover of this
manual and make sure that dryer is installed correctly.
D327IE2A
D197IE0A
ELECTRIC
Connect to 20 Amp circuit.
50 Hz
250 V
D198IE0A
250 V
10A
GAS
Plug cord into separately fused
10 Amp circuit.