7
DRAWER ADJUSTMENT AND REMOVAL
ADJUSTMENT:
A1) Turn the metal adjustment
screw to adjust the drawer
front up and down.
A2) If the drawer is not adjusting
in position, turn the right
screw to unlock the hinge
and retry step A1.
B) Adjusting your drawer fronts to
the left and right can be a little
tricky. To make adjustments,
you will adjust the white
adjustment screw inward and
outward of your drawer kit by
using a Phillips screwdriver.
Protrude both adjustment
screws to the right to force the
drawer front to move to the
left. Protrude both adjustment
screws to the left to force the
drawer front to move to the
right.
REMOVAL:
C) To release the drawer box
from the drawer glides, begin
by placing your hands under
the center of the drawer front.
Be careful not to place hands
under the drawer glides. From
the closed position, use gentle
force to extend the drawer
completely out and then lift
upwards in one fluid motion.
D) To remove the drawer front,
use a Phillips screwdriver into
the hollowed-out location
(looks like a + symbol) and
rotate towards the back of the
drawer box until the bracket is
released. Repeat on both left
and right sides of the drawer.
Note: If the white screw on the
mounting bracket has been
adjusted and is protruding out,
you may need to un-adjust the
screw to remove or re-install
the drawer front.
B-
left/right
adjustment
C-
release the
drawer box
from the
glides
D-
remove the
drawer front
A1 & A2-
up/down
adjustment
A1
A2
