3
STEP 3:
• Install the long screw (478-9832) through the back of the drawer box into the drawer bottom. This helps to add
stability to your drawer kit.
STEP 4:
• Attach the drawer front to the drawer box by lining up the brackets with the slots in the drawer box. Push until you
hear a “click” on both the left and right side. If the drawer front does not “click” into place, verify that the spring
loaded latch is in the open position by placing a Phillips screwdriver into the drawer removal hole and turning
towards the back of the drawer. See page 7 for drawer front removal.
