26
6
TIMER
• With the unit ON, press this button to set
OFF timer or with it OFF to set ON timer.
• Press this button once, a “ON(OFF)”
will flash.
• Press the ARROWS (up/down) to set the
number of hours in which the unit will be
turned ON/OFF, with an interval of 0.5
hour if less than 10 hours, or
• 1 hour if longer than 10 hours , and a
range of 0.5-24 hours.
•
Press it again to confirm the setting, the
“ON (OFF)” will stop flashing.
• If the timer button is not pressed longer
than 10 seconds after the “ON (OFF)”
start flashing, the timer setting will be
exited.
•
If a timer setting is confirmed, pressing
this button again will cancel it.
• Note: When a ON timer is set, all
function buttons (except SLEEP, DISPLAY
and iFEEL can‘t be set ) are valid and
when the ON time set is up, the unit will
operate as preset.
7
HEALTH
Press this button with the unit ON to activate health related functions, such as negative ion,
electrostatic precipitation, PM2.5 removal, etc, depending on the actual configuration of each
model. Press this button again to deactivate the HEALTH function.
iCLEAN
Press this button with the unit OFF, the remote controller will display “CL” and the unit will
automatically clean dust off the evaporator and dry it, to increase the cooling and heating
efficiency. The iCLEAN function runs for approximately 30 minutes, during which if the unit
is turned on with the remote controller or this button is pressed again, the iCLEAN will be
deactivated.
8
Each time the ARROW UP is pressed, the temperature setting will increase by 1°C and each
time the ARROW DOWN is pressed, it will decrease by 1°C. The temperature setting ranges
from 16°C (60°F) to 32°C (90°F). Note: The temperature cannot be set in AUTO or FAN
mode, thus these two buttons are not functional.
9
TURBO
Press this button only in COOL or HEAT mode to set TURBO on or off to speedy the cooling
or heating. When TURBO is on, the air speed is HIGH. When TURBO is off, the air speed will
restore to previous status.
