Klarstein Metrobreeze 9 Paris, Manual

Page: 30 / 84

30
EN
The cooling effect
is not good. There is direct sunlight. Pull the curtains.
Doors or windows are open;
there are a lot of people; or in
cooling mode, there are other
sources of heat. Close doors and windows,
and add new air
conditioning.
The filter screen is dirty. Clean or replace the filter
screen.
The air inlet or outlet is
blocked. Clear obstructions.
Big Noise The air conditioning is not
placed on a flat surface.
Put the air conditioning on a
flat and hard place (to reduce
noise).
The compressor
does not work. Overheat protection starts. Wait for 3 minutes until the
temperature is lowered, and
then restart the machine.
The remote control
does not work. The distance between the
machine and the remote
control is too far. Let the remote control get
close to the air conditioning,
and make sure that the
remote control directly faces
to the direction of the remote
control receiver.
The remote control is not
aligned with the direction of
the remote control receiver.
Batteries are dead. Replace batteries.
Displays ‚E1‘. The pipe temperature sensor is
abnormal. Check the pipe temperature
sensor and related circuitry.
Displays ‚E2‘ The room temperature sensor
is abnormal. Check the room temperature
sensor and related circuitry.