Klarstein Hot & Hot, Manual

Page: 29 / 48

29
EN
How to disconnect a gas bottle
1. Except for twin-cylinder installations with a changeover valve, turn off the gas tap
if fitted to the appliance. Wait until the burner and pilot light have gone out. For
installations with a changeover valve, it is only necessary to switch off the empty
cylinder.
2. Replace the orange safety cap onto the empty cylinder.
Warning
Danger of scalding
The handle black area (see above picture for reference) will become
hot when the gas grill in use, be careful! Do not touch the black
area.
USE
Energy saving tips
• Reduce the opening time of the lid.
• Turn the grill off as soon as cooking is completed.
•
Preheat the gas grill for 10 to 15 minutes only. (Except for the first use)
• Do not preheat longer then recommended.
• Do not use a higher setting than required.
• Connect the hose and regulator to the gas container at the left side of the gas grill
Keeping in mind that the gas container must be kept away from heat and in a safe
position .The hose dimension is 8-10mm diameter. The Length of hose recommended
which shall not exceed 1.5 m.