25
EN
Some units may
come with this
attachment. It
is not needed
and should be
removed from
the coupler prior
to Step 3.
Step 3:
The CO2
rubber
directional
washer goes
into the
coupler.
Step 6:
After the backflow stopper has been
inserted, there is a washer that should
be placed on top of the coupler.
Step 7:
After the tap tower has been placed on
the refrigerator and the hose line feeds
through the bottom, attach the wing nut
to the coupler.
Step 4:
Connect the CO2
line from the regulator to
the coupler
Step 5:
Put one of
the backflow
stoppers in the
coupler (the
torpedo goes
in with rounded
side down).
There are three different possible
backflow stoppers.
OR
OR
