Klarstein 10041227, Manual, Page: 39 / 144

39
EN
• Remove the metal grease filter and mark the mounting holes on the back of
the cooker hood on the wall.
• Remove the cooker hood again. Drill four holes with a diameter of 8 mm at
the marked points. Insert the dowels into the holes.
• Hang the cooker hood on the wall bracket and fix it to the dowels with the
screws from the inside of the hood.
• Attach the exhaust hose to the outlet.
• Slide the upper part of the shaft into the lower part of the shaft. Pay
attention to the position of the ventilation openings depending on whether
they are used for exhaust air or recirculation air (see illustration).
• Attach the shaft bracket to the bottom/outer shaft.
Dowel
2 screws
(4 x 30 mm)
Upper/inner part
of the shaft
Shaft bracket Shaft bracket
Lower/outer
part of the shaft