Klarstein 10041183, Manual

Page: 66 / 176

66
EN
Problem Possible Causes What To Do
Knocking noise in
the water pipes
This may be caused by
on-site installation or
the cross-section of the
piping.
This has no influence on the
dishwasher function. If in
doubt, contact a qualified
plumber.
The dishes are not
clean.
The dishes were not
loaded correctly.
See notes in “Loading &
unloading your dishwasher”.
The programme was not
powerful enough.
Select a more intensive
programme.
Not enough detergent
was dispensed.
Use more detergent, or
change your detergent.
Items are blocking the
movement of the spray
arms.
Rearrange the items so that
the spray
can rotate freely .
The filter combination is
not clean or is not cor-
rectly fitted in the base
of wash cabinet.
This may cause the spray
arm jets to get blocked
Clean and/or fit the filter
correctly Clean the spray arm
jets.
Cloudiness on
glassware.
Combination of soft
water and too much
detergent.
Use less detergent if you
have soft water and select
a shorter cycle to wash the
glassware and to get them
clean.
White spots appear
on dishes and
glasses.
Hard water area can
cause limescale deposits.
Add more detergent.
Black or grey marks
on dishes.
Aluminium utensils have
rubbed against dishes.
Use a mild abrasive cleaner to
eliminate those marks.
The dishes are not
drying
Improper loading Load the dishwasher as
suggested in the directions.
Dishes are removed
too soon
Do not empty your dishwash-
er immediately after washing.
Open the door slightly so that
the steam can come out. Take
out the dishes until the inside
temperature is safe to touch.
Unload the lower basket first
to prevent the dropping wa-
ter from the upper basket.