33
EN
•
Remove the metal grease filter and mark the mounting holes on the back of
the cooker bonnet on the wall.
• Remove the cooker bonnet again. Drill four holes with a diameter of 8 mm
at the marked points. Insert the dowels into the holes.
•
Hang the cooker bonnet on the wall bracket and fix it to the dowels with the
screws from the inside of the bonnet.
•
Attach the exhaust air hose to the outlet.
•
Push the upper part of the shaft into the lower part. Pay attention to the
position of the ventilation openings depending on whether they are used
for exhaust air or recirculation air (see illustration).
•
Attach the shaft bracket to the lower/outer part of the shaft.
Dowel
2 Screws
(4 x 30 mm)
Upper/inner part
of the shaft
Shaft bracket
Shaft bracket
Lower/outer
part of the shaft