30
EN
Important notes on operation
•
Make sure that the water tank, water filter and water separation pipe are not
blocked. Clean them.
•
The water temperature influences the ice cube production. The lower the
water temperature, the more ice cubes are produced.
• The lower the ambient temperature, the more ice cubes are produced.
• Only use good quality water to ensure that the pump works properly. If you
use poor quality water, this may cause the pump to be noisy. However, this
has no effect on the operation of the pump.
•
When you switch off the unit, the compressor will start 3 minutes later.
TROUBLESHOOTING
Problem
Potential cause
Possible solution
The symbol
lights up
No water
Switch off the device and fill
the water tank with drinking
water up to the maximum
mark. Restart the unit.
The symbol
lights up
Too many ice cubes in the
ice basket
Remove the ice cubes from
the ice basket
The water tank
is full but the
symbol lights
up
The inlet solenoid valve is
broken
Contact customer service
The symbol [E1]
lights up
The room temperature
sensor is broken.
The unit is still functional,
replace the sensor
The symbol [E2]
lights up
The water temperature
sensor is broken.
The unit is still functional,
replace the sensor
