18
EN
Milk foam function
1. First press the button and then the
button. At this time, the indicator
light
will start flashing. As soon as the indicator light is permanently on,
the preheating process is finished.
2. Fill 1/3 of the milk jug with chilled whole milk. Dip the steam nozzle 1 cm
deep into the milk surface and then slowly open the steam knob until steam
emerges from the front of the nozzle.
Note
: Release some water from the steam pipe first before foaming milk.
3. When the milk temperature reaches approximately 75 °C and the milk foam
starts to rise, you can move the steam knob to the position
and press
the
button to stop the function.
Hot water function
Press the button and turn the steam knob to the
position. Hot water
will then continuously emerge from the steam line. Turn the steam knob to the
position to end the function.
