20
EN
Wall installation
Depending on the dimensions of your model, mark the places on the wall where holes
are to be drilled. Drill the holes and insert the supplied dowels into the holes. Fix the
wall bracket with the screws supplied.
Hang the unit on the wall bracket. To do this, first hook the lower two hooks in and
then the upper two.
Abstand
10035400, 10035401
10035402, 10035403
A
254 mm
254 mm
B
254 mm
254 mm
C
289.5 mm
610.5 mm
Note
: Before drilling the holes, make sure that no pipes or cables run into the wall at
the selected points. Also make sure that the screws are properly seated and that the
heater is securely fixed to the wall.
