Klarstein 10035235, Manual

Page: 22 / 64

22
EN
OPERATION
Commissioning
1. Carefully remove the appliance from the box. Save the carton for storage during
the off-season.
2. Make sure that the on/off button is switched off before connecting the appliance.
3.
The heater must be fully assembled and mounted according to the assembly
instructions.
4. It is better not to use the same electrical connection with other power-hungry
appliances to avoid overloading the circuit.
Switch on
Connect the appliance to a power supply. The operating light turns on after a short
humming sound. Switch on the appliance with the on/off button (4). The current room
temperature now lights up in the display. The factory preset temperature is 35 °C.
Setting the temperature
Press the settings button (1). The numbers "10" and "9" will start flashing. Then press the
arrow keys (2) and (3) to increase or decrease the temperature by 1 °C.
Setting the timer
Switch-on time: When the appliance is switched off, press the button (1) twice to set the
timer to 1-24 hours. Press buttons (2) and (3) to set the temperature. After the settings
have been made, the ambient temperature is displayed. The indicator (8) lights up when
the timer is running and switches off when the timer has expired.
Switch-off time: In heating mode, press the button (1) to set the timer to 1-24 hours. After
the settings have been made, the ambient temperature is displayed. The indicator (8)
lights up when the timer is running and switches off when the timer has expired. Then the
appliance stops the heating operation.
Setting the heating level
a. In operating mode, the button (2) switches between a high heating level (HIGH)
and a heating stop (OFF). The indicator (7) lights up when the heating level is high
and switches off when the heating is OFF.
b. In operating mode, button (3) switches between a low heating level (LOW) and a
heating stop (OFF). The indicator (6) lights up at a low heating level and switches
off when heating is switched off.
c. In operating mode, the button (12) switches between a low heating level (LOW),
a high heating level (HIGH) and a heating stop (OFF). At a high heating level the
indicator (7) lights up, at a low heating level the indicator (6) lights up.