Klarstein 10035077, Manual

Page: 27 / 74

27
EN
4. Press the EDIT button . The display shows P1-P6 (for each day, it can be set
maximum 6 time periods). Such as setting P1: see display C on the picture below.
5. Press the TIME/ON button . The display shows 00”as default. Press the TIME/
ON button continuously to set the turn-on time. Such as set the turn-on time
7:00 AM (Memo: the setting time 0-24 for choice), see display C on the picture
below.
6. Press the TIME/OFF button . The display shows the previous step turn-on time
by default. Press the TIME/OFF button continuously to set the turn-off time.
Such as set the shutdown time at 13:00 PM (see display E on the picture below).
Note: Turn-off time is later than turn-on time. When turn-on time is the same
as turn-off time, the appliance is in stand by mode
7. Repeat steps 2-6 above, you can set the whole weekly program (Each day, the
work of each segment opens, the time of shutdown).
8. After above setting, press the DAY button to choose the unit turn-on day of the
week. Press the EDIT button to choose the turn-on time of the day. Then press
the button or , to set desired temperature (temperature range: 10-49 °C).
Press the OK button to confirm the setting.
9. To cancel the weekly function, press the P button . The light “P” will go off. The
weekly program is off. The appliance will revert to the previous function working
status.
NOTES :
After the above setting are completed and P program is working, press the DAY button
and the EDIT button to check the setting time of each day and time periods.

The turn-on time periods 00-24 hours, cannot set to minutes.

The “TIME/OFF” can not be less than “TIME/ON”.

When the “TIME/ON” is the same as “TIME/OFF”, the time period enters into
standby mode.
Note: If main switch off, power cut off, or plug out, it need reset. You can press the
SET button to check you set Time/Day.