37
EN
Plug in supply of 220-240V~ 50Hz, push the ON/OFF (0/I) button located at the
bottom of the heater to switch it on. Buzzer will have a short “D” sound. Display will light
up for 10s.
Touch
once to turn on heating. Button light will go out in 10s when no operation is
conducted. Touch any button could reactivate the button light.
Touch once again to turn off heating & appliance stay at standby mode.
Note: Motor will continue working for extra 15s to drive away the residue heat inside
unit before turning off.
To switch the appliance off, push ON/OFF (0/I) button again and disconnect the plug.
Set local day and time
At the fi rst time usage, icon will keep fl ashing to remind user to set local day and
time before further operation.
Long touch
button for 3 seconds to activate timer setting,the display will show d1
(Monday) and fl ashes, touch
or
to select the day, the selected fi gure will fl ash
accordingly. Touch
to confi rm the day setting. Then come to hour-setting. The display
fl ashes, touch
or
to select the hour among 0-23, touch
to confi rm hour setting.
Then come to minute-setting. The display fl ashes, touch
or
to select the minute
among 0- 59. Touch
to confi rm minute setting.
Note: program will automatically return to initial display in 10s when no operation is
conducted during setting.
Power Setting
Power
Icon Display Function
PTC heating high power
1800 W
Room heating
PTC heating low power
1100 W
Room heating
Panel Heating
200 W
Towel heating
Full power
1800 W +
200 W
= 2000 W
Room h
towel heating
