26
EN
TROUBLESHOOTING
Problem
Possible cause and suggested solution
Ingredients stuck in the
pump.
Flush the pump by connecting a hose to the curve pipe.
Dismantle the pump to remove the ingredients.
Failing to reach 100 °C.
Put lid on for 1 to 2 mins.
Do temperature correction.
Temperature correction.
Do temperature correction. Press „-“ and „+“ at the
same time enter into C1 temperature correction setting.
Setting range is from -10°C to +10°C (or -50 °F. to
+50 °F, respectively). Press Temp button to confirm the
setting and exit the temperature correction page
ERR-1 shown on display.
Temperature is lower than -20 °C, low temperature
warning.
Possible sensor failure. Please contact Customer Service.
ERR-2 shown on display.
Temperature is higher than 120 °C, overheat/boil-dry
warning.
Sensor failure, please contact dealer for replacement.
During the heating
process, the device
suddenly goes off.
Reduce the heating temperature.
HINTS ON DISPOSAL
According to the European waste regulation 2012/19/EU this
symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it should
be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of
this product. For more detailled information about recycling of
this product, please contact your local council or your household
waste disposal service.