38
EN
When the water level of the floor pan
reaches a preset level, the display shows
[P1] and the WATER FULL indicator lights
up. Carefully move the unit to a drain,
remove the lower drain plug and drain
the water. Close the lower drain plug
and restart the machine. The [P1] symbol
should then disappear. If the error occurs,
call customer service.
Note: Make sure that the lower drain
plug has been refitted before putting
the machine into operation.
CLEANING AND CARE
Important notes
•
Switch off the appliance before cleaning and wait 5 minutes to avoid electric shock.
• Do not use gasoline, alcohol, thinner, other chemicals, or a liquid insecticide for
cleaning as these substances may cause the paint to flake, crack, or deform.
• Never attempt to clean the appliance by pouring water directly over any surface,
as this may damage the electrical components.
Surface Cleaning
• Clean the surface with a soft cloth. Dip the cloth in water at a temperature below
40°C (104°F) and wring it out well.
Bottom tray
drain outlet
