21
EN
Remote control
Turn on the main power switch, the buzzer beeps once to indicate that the machine is
powering on, then the machine is in a standby state.
Keys
Turn on the appliance. The flame lights up.
The flame icon appears on the LCD screen of the remote control.
Week, time (24h system), and temperature setting are displayed nor-
mally. Press it again, the screen of the remote control will turn off.
Turning the the flame and teh charcoal bed on and off.
Adjusts the flame brightness.
Adjust the brightness of the coal bed.
Heating level control
Press 1x: 1900 W.
The display of the remote control lights red.
Press 2x: 950 W.
The LCD screen displays . the indicator lights blue.
Press 3x drücken: Turn off the heating function.
Note: in case the heating elements are turned on by remote control, whether
the heating elements work or not depends on the temperature setting and
ambient temperature. They work only when the temperature setting is above
the ambient temperature.
Temperature setting from 7 °C to 30 °C.
Increase or decrease the number by 1.
Press once, the corresponding figure flashes. Press
now to set current
time and week. The buzzer does not beep when the key is pressed.
.
Timer parameter setting
Press 1x: the LCD displays "1" to indicate Monday. Now the temperature
setting flashes. Press
to set the timing temperature for Monday. Press
to confirm. Press
to enter the time setting for timing. The displayed
time "00-23".
Press
to set the current operating state of timing function.
