41
Step 6: Neaten the Pipes
Step 5: Connect Outdoor Electric Wire
1. The pipes should be placed along the wall, bent reasonably and hidden possibly. Min. semidiameter of
bending the pipe is 10 cm.
2. If the outdoor unit is higher than the wall hole, you must set a U-shaped curve in the pipe before pipe goes
into the room, in order to prevent rain from getting into the room.(
1. Let the connection wire sleeve go through the two holes of baffle; tighten the connection joint of sleeve
and baffle; remove the wire clip; connect the power connection wire to the wiring terminal according to
the color; fix them with screws. (see below)
Handle
Wire clip
Wiring board
Grounding
wire
N
(1)
2 3
blue
violet
black
yellow-
green
Connect to indoor unit
2
N(1)
3
2. Fix the power connection wire with wire clip.
3. Fix the stopper on handle with screw.
Notes
• After tightening the screw, pull the power cord slightly to check if it is firm.
• Never cut the power connection wire to prolong or shorten the distance.
