48
EN
ERROR CODES
H8
Chassis is full of water.
Pour out the water inside chassis. If „H8“ still exits,
please contact professional person to maintain the
unit.
F1
Malfunction of ambient
temperature sensor.
Please contact professional person to deal with it.
F2
Malfunction
of evaporator
temperature sensor.
Please contact professional person to deal with it.
F0
Refrigerant is leaking
or system is blocked.
Re-energize the unit after turning off and pulling
out the plug for 30 min; If there‘s still malfunction,
please contact after- sales service.
H3
Overload protection
for compressor.
Check if the unit is under high-temperature and
high- humidity environment; if ambient temperature
is too high, power off the unit and then energize it
for operation after the ambient temperature drops
to 35 °C below
E8
Overload malfunction.
Check if the evaporator and condenser are
blocked by some objects; if yes, take away the
objects, power off the unit and then energize it
for operation. If the malfunction still occur, please
contact our after-sales service center.
F4
Outdoor tube
temperature sensor is
open/short-circuited.
Please contact professional person to deal with it.
