12
Troubleshooting
2. Screw tight the nut cap, shake it up and down several times, and lastly wash it with clean water.
Water tank
1. Drop small amount of oxalic acid detergent into the water tank , and load a half of water box.
2. Screw tight the nut cap, shake it up and down several times.
3. Wash it with clean water.
Cleaning water flume
1. If there is scale left in water flume, clean it with a soft cloth dipped with oxalic acid detergent.
2. Wash it with clean water.
Get rid of the remaining water in the water flume and water tank when the machine is not used for a long
time. Clean, dry all the parts before storage and pack in the origin carton.
.
Problem
Possible reasons
Solutions
No wind nor mist
Check plug
Plug into socket.
Check power switch
Turn on power switch.
No water in tank
Add water.
less water in tank
Add enough water.
Mist smells peculiar
New machine
Take off tank cover, place the water tank in
cool and dry place for 12 hours.
Too dirty water, Or water in tank
too long time.
Clean water tank, Replace clean water.
Noise
Tank in incorrect position
Put the tank in correct position.
Less water in tank
Add water.
Uneven level for machine
Place it on even flat or ground.
Steam out from outlet
surrounding
Clearance between steam outlet
and water tank
Sink the steam outlet cap in water and use
it again.